MS-DOS v6.22 Help: DRVSPACE /HOST

-------------------- MS-DOS v6.22 Help: DRVSPACE /HOST ---------------------
<Examples>                                                         <Index>
----------------------------------------------------------------------------

                               DRVSPACE /HOST

Changes the drive letter of the host drive for the specfied compressed drive
by modifying the corresponding ActivateDrive setting in the <DRVSPACE.INI>
file. You cannot use this switch to change the letter of a compressed
drive's host drive if you used free space to create that compressed drive.

Note:  For this switch to take effect, you must restart your computer.

Syntax

    DRVSPACE drive1: /HOST=drive2

Parameters

drive1

    Specifies the current drive letter of either the compressed drive or its
    host drive.

drive2
    Specifies the new drive letter for the host drive.

                                      ***

<Syntax>
----------------------------------------------------------------------------

                          DRVSPACE /HOST--Examples

If your compressed drive letter is C, and your host drive letter is H, you
can use the following command to change the host drive letter to G:

    drvspace c: /host=g:

You can also use the following command to change the host drive letter to
G:

    drvspace h: /host=g:

                                      ***

----------------------------------------------------------------------------
<Top of page>